Skip to content

Guide · 6 min read

How to make a quiet tab louder in Chrome (YouTube, lectures, podcasts)

To make a quiet tab louder in Chrome, first check the three volume controls in front of it: the site's own player, Chrome's level in your computer's volume mixer, and your system volume. If all three are at maximum and the tab is still too quiet, Chrome has no built-in way to go above 100%. A volume booster extension such as Loudcrest can raise that one tab up to 600%, ideally while keeping fullscreen working.

Updated · By QuantumPlug Technologies, makers of Loudcrest

The short answer

  1. 01

    Turn up the player. Drag the site's own volume slider (the speaker icon in the video or audio player) to the top. Many players remember a lower level from last time.

  2. 02

    Make sure the tab isn't muted. A muted tab shows a crossed-out speaker on its tab. Right-click the tab and choose Unmute site.

  3. 03

    Check Chrome in your system mixer. On Windows 11, open Settings › System › Sound › Volume mixer and set Chrome to 100. On a Mac, there is no per-app level; check the output device and the volume in Control Centre.

  4. 04

    Raise your device volume. Turn up your speakers or headphones, and check that sound is going to the device you expect.

  5. 05

    Boost the tab past 100%. If the tab is still too quiet, use a volume booster extension. One that boosts inside the page, such as Loudcrest, keeps true fullscreen working.

Check the player and the tab first

Most quiet tabs aren't actually at their maximum: the site's own player slider is often below 100%, and Chrome can mute a whole site. Hover the player's speaker icon and drag its slider to the top, then look at the tab itself. A crossed-out speaker on the tab means the site is muted; right-click the tab and choose Unmute site. You can review muted sites at chrome://settings/content/sound.

On YouTube, keep in mind that the site turns loud videos down toward a common loudness but doesn't turn quiet ones up. A quietly recorded lecture or podcast stays quiet however high you set the player, which is exactly the case where a boost above 100% helps.

Check your computer's volume and Chrome's level

Your operating system can turn Chrome down separately from everything else. On Windows 11, open Settings › System › Sound › Volume mixer (or right-click the speaker icon in the taskbar and open the volume mixer) and make sure Chrome's slider is at 100 and the right output device is selected. On a Mac, there is no per-app volume: check the volume in Control Centre or on the keyboard, and the output device in System Settings › Sound.

Some Windows sound drivers also offer a Loudness Equalization enhancement in the speaker's properties, which evens out quiet and loud passages for every app at once. Bluetooth headphones can have their own volume, separate from the computer's, so turn that up too.

Chrome has no built-in boost above 100%

Chrome itself can't make a tab louder than the page's own 100%: its only per-site sound control is mute or unmute, and it has no equalizer. Once the player, Chrome's level and your device are all at maximum, the remaining options are an extension that amplifies the tab, or external speakers or headphones that go louder.

For quiet speech, Chrome's Live Caption is worth knowing too: turn it on under Settings › Accessibility › Live Caption and Chrome captions spoken audio on your computer, in the languages it supports.

Volume booster extensions: two ways to go louder

Volume booster extensions make a tab louder in one of two ways. Some process the sound inside the page, on the page's own audio and video elements. Others use tab capture: Chrome hands the whole tab's sound to the extension, which plays it back louder. Both can go past 100%, but they behave differently in fullscreen and on protected players.

Tab capture works on every page, including DRM-protected players used by some film and music services. The cost is visible: Chrome shows a sharing icon on the tab while it is captured, and fullscreen video stays inside the browser window instead of filling the screen. In-page boosting leaves fullscreen alone, but can't reach protected players.

In-page boost vs tab capture vs system volume.
In-page boost (Loudcrest)Tab-capture boostersSystem volume only
Louder than the page's own 100%Yes, up to 600%YesNo: stops at your device's maximum
True fullscreen videoWorks as normalStays inside the browser windowWorks as normal
Sharing icon on the tabNoYes, while boostingNo
Limiter against cracklingYes, peaks held below 0 dBDepends on the extensionNot needed: no boost
Separate level for each tabYes, in a per-tab mixerDepends on the extensionNo: one level for all of Chrome
Works on DRM-protected playersFalls back to one-click tab captureYesYes
Bass, voice and treble shapingPresets and a 3-band equalizerDepends on the extensionOnly if your sound driver offers it

Why in-page boosting keeps fullscreen working

When an extension boosts the sound inside the page, the page's video player is untouched: Chrome isn't capturing the tab, so true fullscreen works and no sharing icon appears. Loudcrest is a free Chrome extension that works this way. It makes a tab up to 600% louder, holds peaks just below 0 dB with a built-in limiter so the sound doesn't crackle, and gives every tab playing sound its own slider in a mixer.

  • Presets for lectures and films: Voice clarity, Bass boost and Treble boost, or a Custom 3-band equalizer (Bass 150 Hz shelf, Mid 2 kHz peak, Treble 6 kHz shelf, ±12 dB each).
  • Per-tab control: a mixer for every tab with sound, and Mute other tabs in one click.
  • Remembers a site's level if you turn on Remember for this site, with keyboard shortcuts (Alt+Shift+Up, Alt+Shift+Down, Alt+Shift+0).
  • On DRM-protected players, live calls and audio from another site, it explains why in-page boosting isn't possible and offers tab capture with one click.
  • No account, no tracking and no network requests; sound is processed on your device. It needs Chrome 116 or later.

Listen safely at high volume

Boosting a quietly recorded lecture to a normal listening level is fine; boosting already loud audio into headphones is how hearing gets damaged. A limiter prevents distortion, not hearing damage. The World Health Organization's safe-listening guidance is to keep adults' average exposure below about 80 dB for no more than 40 hours a week, and lower for children.

  • Start at 100% and raise the level in small steps until speech is comfortable, not until it feels loud.
  • With headphones, set the headphone or system volume first, then use the boost only for quiet sources.
  • Take breaks. Ringing in your ears, or sound seeming dull after listening, means it was too loud.
  • Very high levels can make small laptop speakers buzz. Lower the level, or use a voice preset that trims the bass they struggle with.

Common questions

Can Chrome go above 100% volume?

Not by itself. Chrome's only per-site sound control is mute or unmute. To make a tab louder than the page's own maximum, you need a volume booster extension, or speakers or headphones that go louder.

How do I make YouTube louder in Chrome?

Set YouTube's player slider to the top, make sure the tab isn't muted, and check Chrome's level in your system's volume mixer. If a video is still too quiet, a volume booster extension can raise that tab past 100%; one that boosts inside the page keeps YouTube's fullscreen working.

Why is one tab much quieter than the others?

Sites and recordings are mastered at very different loudness, and some sites lower loud content without raising quiet content. A per-tab volume booster lets you raise the quiet tab without making every other tab louder too.

Does a volume booster work in fullscreen?

It depends on how it works. Extensions that boost inside the page keep true fullscreen. Extensions that use tab capture show a sharing icon on the tab and keep fullscreen video inside the browser window.

Can a volume booster work on protected streaming services?

Only through tab capture. DRM-protected players can't be processed inside the page, so Loudcrest detects them and offers tab capture with one click instead.

Is boosting to 600% safe?

It is safe for your hearing only if the result is at a comfortable level. Use high boosts for quiet sources, raise the level gradually, keep headphones moderate and take breaks.